Commercial Duty Slide Gate Opener for Single/Dual Gate Use - Max Gate; Weight 800 lbs./32 ft with a 27 ft (8.3m) opening
Commercial grade sliding gate. Comes with the addition of an internal lock. This built-in locking device locks the gate in the closed position and automatically releases when the gate operator is activated by an entry device.

The GP-SL050 is designed for continuous duty operation of sliding gates. Max Gate; Weight 800 lbs.
(326.9 kg), Length 32 ft. (9.8 m) with a 29 ft. (8.3 m) opening. Assumes gate to be free sliding in good working condition on a level plane.

This operator also requires the of the GTO receiver (RB709U)

This operator comes with 20ft of  No.41 Chain. Additional chain  and  master link can be purchased
at this link:

Batteries (12vdc, U1, 230A minimum) not included

Click here to view User/Installation manual

• AC Powered with inherent UPS (Uninterrupted Power System / Battery Backup)
• Continuous duty gate operation and all DC powered counters / safety devices.
• On board 12 V DC power delivers 300 Amp UPS
•  #41 Chain
• 12” per second maximum travel speed

For Dual Sliding Gates
For dual gate installations you purchase 2 GP-SW100 Operators

Electrical Specifications..
- GTO’s advanced technology commercial control board
     •Digital / optical limits with fine adjustment JOG push buttons for easy and accurate setting of limits
     •100% solid-state motor controls circuitry
     •APS (Absolute Position System) tracking system
     •On board 3-Push button control station
- Operation, diagnostic and safety alarms, reverse sensor system
- Visual LED and audible diagnostic indicators
- Plug-in loop detector inputs for exit, shadow and safety loops
- Smooth start / smooth stop—for long mechanical life expectancy
- Built in power management system utilizing a high effiency switchmode power supply. (AC power supply, audible and visual low battery indicators, no loss of functionality in battery back up mode)
- Auto close adjustable 3-120 seconds delay
- Fail Safe or Fail Secure DIP switch selectable for low battery operation
- 12 Vdc, 300mA (.3 Amp), poly fuse protected auxiliary power output.